Championnat d’Europe OK et OK junior PF International 2018

Championnat d’Europe OK et OK junior PF International 2018

OK – Finale

3ème HILTBRAND PEDRO (CRG / TM)

10ème BRADSHAW CALLUM (CRG / TM)

14ème ROSSO ANDREA (CRG / TM)

OKJ – Finale

7ème BORTOLETO GABRIEL (CRG / TM)

CRG kart     TM racing

ANOTHER PODIUM FOR HILTBRAND, THE NEW LEADER OF THE EUROPEAN CHAMP!
Pedro Hiltbrand and CRG got again on the podium in the second round of the European OK and OK-Junior Championship in England at PFI. This third place is great for the Championship. Bortoleto the best of CRG drivers in OK-Junior.

The second round of the European Championship of OK and OK-Junior has taken place at the spectacular circuit PFI. This difficult track has been quite well tested lately, especially in 2017 when it housed the World Championship. Pedro Hiltbrand has been excellent in OK, especially considering the Championship, and claimed the third place at the end of an exciting finale. This result earned him the classification lead.
HILTBRAND ON THE OK PODIUM. Three CRG drivers managed to qualify for the Final in the OK European Championship at PFI: Pedro Hiltbrand, Callum Bradshaw and Andrea Rosso. This has been a good race, exciting and spectacular, with a super Pedro Hiltbrand taking another podium, after the P2 scored in Sarno. In England, Hiltbrand was third after the disqualification of Travisanutto, who crossed the finish line as first, and the penalty handed to Hodgson, who was third at the flag. Hiltbrand managed to hold P3 during the Final, but then he had to give way to his rivals. This third place, together with the second place obtained in Sarno, boosts Hiltbrand’s confidence for the remaining of the European Championship that he managed to win back in 2016. Callum Bradshaw managed to end in the top-ten in tenth place, while Andrea Rosso was 14th. Hiltbrand was sixth after heats, Bradshaw 14th and Rosso 21st.

Pedro Hiltbrand: “It has been a tough weekend as always, we were struggling a bit after qualifying, but after the heats I was getting closer to the front-runners. I expected more from the Final, it worked quite well for the first six-seven laps but then I was loosing a bit. I want to say thanks to all my team CRG, to TM and my mechanic and congratulations for the fantastic work. We are now going to Ampfing to try and win, of course we need to think about the championship but there are still two rounds to be run. »

In OK, Franco Colapinto had been unlucky having to retire from the closing heat on Sunday and ending only 51st. He therefore could not qualify for the Final. Ayrton Fontecha (46th) could not recover as he would have deserved.

GOOD BORTOLETO IN OK-JUNIOR. It has been a real pity for Gabriel Bortoleto, who represented CRG in the OK-Junior’s final in this second round of the European Championship at PFI. He eventually secured a seventh place that is quite tight on him, considering his performance throughout the weekend. Bortoleto had managed to secure a front row start for the Final after a promising P8 in qualifying, two wins and three second places in the heats. These results were quite promising, but Bortoleto unfortunately lost some ground and had to settle for P8.

Among CRG drivers, Malaysia’s Adam Putera (36th after the heats) did not manage to qualify for OK-Junior’s final, despite some good placings, as happened to Enzo Trulli (37th), who was penalized by the 60th place in qualifying, Alfio Andrea Spina (43°), the Americans Tyler Maxson (56th) and Elio Giovane Gonzales (66th), Leonardo Bertini Colla (59th) and the Chinese Xizheng Huang (61st).

TM KZ10 C Black Edition Power

TM KZ10 C Black Edition Power

COMMANDE DIRECTE PIECE TM KZ10 B – TM KZ10 C

REFERENCES DESIGNATION Prix HT Prix TTC
1 21014 CAPUCHON DE BOUGIE 6,88 € 8,26 €
2 6024 BOUGIE 12,08 € 14,50 €
3 49486 VIS BTR 6×30 0,42 € 0,50 €
4 2558 CULASSE COMPLETE TM KZ10 C 188,13 € 225,76 €
4a 02558.1 COUVERCLE DE CULASSE TM KZ10 C 62,50 € 75,00 €
4b 02558.2 INSERT DE CULASSE COMPLETE TM KZ10 C 124,17 € 149,00 €
5 12070 JOINT TORIQUE COUVRE CULASSE 1,46 € 1,75 €
6 05070.05 JOINT DE CULASSE 0,05 2,04 € 2,45 €
6 05070.10 JOINT DE CULASSE 0,10 1,96 € 2,35 €
6 05070.20 JOINT DE CULASSE 0,20 2,21 € 2,65 €
7 12003 JOINT INTERNE 0,83 € 1,00 €
8 12014 JOINT EXTERNE 1,58 € 1,90 €
9 1566 CYLINDRE KZ10 C 541,67 € 650,00 €
9 1567 CYLINDRE KZ10 C RACING 791,67 € 950,00 €
10 28017 RACCORD D’EAU 3,75 € 4,50 €
12 21025 DURIT EAU 5,75 € 6,90 €
13 05053.05 JOINT D’EMBASE 0.05 TM KZ10 C 1,25 € 1,50 €
13 05053.10 JOINT D’EMBASE 0.1 TM KZ10 C 1,25 € 1,50 €
13 05053.15 JOINT D’EMBASE 0.15 TM KZ10 C 1,25 € 1,50 €
13 05053.20 JOINT D’EMBASE 0.2 TM KZ10 C 1,25 € 1,50 €
13 05053.30 JOINT D’EMBASE 0.3 TM KZ10 C 1,25 € 1,50 €
13 05053.40 JOINT D’EMBASE 0.4 TM KZ10 C 1,25 € 1,50 €
13 05053.50 JOINT D’EMBASE 0.5 TM KZ10 C 1,25 € 1,50 €
14 5027 JOINT D’ECHAPPEMENT TM KZ10 C 2,75 € 3,30 €
. 13069.5 CALE D’ECHAPPEMENT 5 mm TM KZ10 C 4,58 € 5,50 €
. 13069.3 CALE D’ECHAPPEMENT 3 mm TM KZ10 C 9,75 € 11,70 €
15 13071 PIPE D’ECHAPPEMENT TM K10 C 13071 + 74,17 € 89,00 €
15 13071+C PIPE D’ECHAPPEMENT TM K10 C 13071+C 74,17 € 89,00 €
16 49484 VIS 6×20 0,13 € 0,16 €
17 9004 CLIPS DE PISTON 0,50 € 0,60 €
18 9000 AXE DE PISTON 6,67 € 8,00 €
19 11056 SEGMENT TM 17,50 € 21,00 €
20 10049 Kit piston Vertex TM KZ10 C 4° complet de 53.93 à 53.97    
20 10045 Kit piston Vertex TM KZ10 C 4° light complet de 53.93 à 53.97    
20 10074 Kit piston Vertex TM KZ10 C segt 8 mm complet de 53,93 à 53,97    
20 K161HK Kit piston METEOR 4° 128 g segment 1 mm TM KZ10C-MAXTER MXS    
20 K161IK Kit piston METEOR 4° 118 gr segment 0,8 mm TM KZ10C-Maxter MXS    
21 K128B CAGE D’AXE DE PISTON 11,58 € 13,90 €

 

REFERENCES DESIGNATION Prix HT Prix TTC
1 18125 Kit bielle TM KZ10 C racing cage SKTZ 22 mm maneton percé 200,00 € 240,00 €
1 18125 Kit bielle complète TM racing 22 mm maneton percé    
1 18125.3 Kit bielle TM KZ10 C racing cage SKTZ 22 mm maneton plein 200,00 € 240,00 €
1 18125.3 Kit bielle complète TM racing 22 mm maneton plein    
1 18125.1 Kit bielle TM KZ10 C racing cage KTZ 22 mm maneton percé    
1 18119 Kit bielle TM KZ10 C racing cage SKTZ 20 mm maneton plein    
2 18053.2 BIELLE NUE D22 racing TM KZ10 C 137,50 € 165,00 €
3 K132 CAGE DE BIELLE ARGENT SKTZ DIAM 22x28x15 libres TM KZ10 C 34,08 € 40,90 €
3 17015 CAGE DE BIELLE ARGENT KTZ DIAM 22x28x15 fixes TM KZ10 C 65,83 € 79,00 €
4 18091 MANETON D 22X50.4 percé 29,17 € 35,00 €
4 18091.3 MANETON D 22X50.4 plein 27,50 € 33,00 €
  18062.2 MANETON D 20X50.4 plein 16,96 € 20,35 €
5 18239 RONDELLE CALAGE ARGENT TM KZ10 C 4,58 € 5,50 €
6 18263 VILEBREQUIN COMPLET Ø22 TM KZ10 C 720,83 € 865,00 €
7 18150 DEMI VILEBREQUIN TM KZ10 C (droite et gauche nu) 500,00 € 600,00 €
8 49010 CLAVETTE DEMI LUNE 0,42 € 0,50 €
9 K024 ROULEMENT 6205 SKF à rouleaux BC1 52,08 € 62,50 €
10 K104 JOINT SPI 20X35X7 5,21 € 6,25 €
11 49056 ECROU D ALLUMAGE TM KZ10 C 2,50 € 3,00 €
12 40313 PIGNON ARBRE PRIMAIRE 19DTS 40,00 € 48,00 €
13 49213 CIRCLIP 14 mm 0,50 € 0,60 €

 

REF. DESIGNATION Prix HT Prix TTC
1 30178 CARTER MOTEUR TM KZ10 C 582,50 € 699,00 €
2 19036 PION DE CENTRAGE 6X12 0,67 € 0,80 €
3 26091 PION DE CENTRAGE 8X12 0,92 € 1,10 €
4 K024 ROULEMENT BC1 A ROULEAUX SKF 52,08 € 62,50 €
5 K104 JOINT SPI 20X35X7 5,21 € 6,25 €
6 3080 Roulement BB1-0722 DB VK 10,42 € 12,50 €
6a 3009 ROULEMENT 6202 Z C3 6,67 € 8,00 €
7 3012 ROULEMENT 6001-2 RS 7,08 € 8,50 €
8 K024 ROULEMENT BC1 A ROULEAUX SKF 52,08 € 62,50 €
9 K022B ROULEMENT 6205 C4 8,50 € 10,20 €
10 19041 ROULEMENT A AIGUILLE DHK 35/12 9,58 € 11,50 €
11 4003 JOINT SPI 26X37X7 3,75 € 4,50 €
12 4004 JOINT SPI 12X22X5 3,46 € 4,15 €

REFERENCES DESIGNATION Prix HT Prix TTC
1A 20066 KIT COMPLET 2 CLAPETS NAPOLI RACING TM 137,50 € 165,00 €
1 20062.2 Clapet carbone 0,34 « T » 30,00 € 36,00 €
  20062.2-k Kit clapets 0,34 T + joint boîte à clapet TM KZ10 C    
2 20049 CONTRE CLAPET CARBONE (2) TM K10 C 34,17 € 41,00 €
3 20062.7 Contre clapet fibre BLEU 6,92 € 8,30 €
. 13082.1 Couvercle de bride d’admission 35,83 € 43,00 €
. 13052 Bride caoutchouc TM KZ10 C 20,83 € 25,00 €
  13059 Bride caoutchouc TM KZ10 B standard 27,00 € 32,40 €
. 20085 BOITE A CLAPETS COMPLETE TM KZ10 C 257,50 € 309,00 €
. 20085 BOITE A CLAPETS COMPLETE TM K10 C    
. 5265 JOINT DE BOITE A CLAPET TM KZ10 C 2 mm 1,83 € 2,20 €
. 5265.1 JOINT DE BOITE A CLAPET TM KZ10 C 1 mm 1,92 € 2,30 €
. 5265.2 JOINT DE BOITE A CLAPET TM KZ10 C 0,5 mm 2,08 € 2,50 €

REFERENCES DESIGNATION Prix HT Prix TTC
1 J074 BOBINE ALLUMAGE PVL 70,83 € 85,00 €
2 J073 STATOR et ROTOR PVL allumage KZ    
3 49479 VIS STATOR PVL M5X40 0,25 € 0,30 €
4 49478 VIS STATOR PVL M5X30 0,21 € 0,25 €
5 48007 RONDELLE STATOR 0,29 € 0,35 €
6 K104 JOINT SPI 20X35X7 5,21 € 6,25 €
7 49037 GOUJON DE CYLINDRE TM KZ10 C 1,67 € 2,00 €
8 26143 CENTREUR DE CYLINDRE TM KZ10 C 2,00 € 2,40 €
9 49640 ECROU DE CYLINDRE TM KZ10 C 1,00 € 1,20 €
10 43011 LEVIER D’ EMBRAYAGE 17,50 € 21,00 €
11 19042 CAGE DE LEVIER D’EMBRAYAGE 9,17 € 11,00 €
12 26006 ENTRETOISE D’AXE DE SELECTION 1,13 € 1,36 €
13 16010 RESSORT DE RAPPEL D’AXE DE SELECTION 2,50 € 3,00 €
14 26053 GUIDE D’AXE 1,92 € 2,30 €
15 28102 AXE DE SELECTION 25,00 € 30,00 €
16 49603 RONDELLE D6X12 0,04 € 0,05 €
17 49635 ECROU M6 0,13 € 0,16 €
18 PMTM313.003 JOINT SPI 12X22X5 3,46 € 4,15 €
19 K007B ROULEMENT 6001-2RS 7,67 € 9,20 €
20 43003 SELECTEUR DE VITESSE TM KZ10 C 15,42 € 18,50 €
21 49484 VIS TCEI 6 x 20 0,17 € 0,20 €
22 4003 JOINT SPI 26X37X7 4,17 € 5,00 €
23 28018 RACCORD D’EAU 3,75 € 4,50 €
24 49883 BOUCHON DE CARTER 9,58 € 11,50 €

 

REFERENCES DESIGNATION Prix HT Prix TTC
1 49211 CIRCLIP 0,83 € 1,00 €
2 35025 PLATEAU PRESSEUR D’EMBRAYAGE TM K10 C 54,17 € 65,00 €
3 49057 ECROU RESSORT EMBRAYAGE 1,75 € 2,10 €
4 16035 RESSORT D’EMBRAYAGE 1,25 € 1,50 €
5 19021 RONDELLE 1,00 € 1,20 €
6 19020 CAGE A AIGUILLES 5,08 € 6,10 €
7 26001 BUTEE D’EMBRAYAGE 3,08 € 3,70 €
8 35017 DISQUE D’EMBRAYAGE GARNI TM KZ10 C 6,67 € 8,00 €
9 35008 DISQUE D’EMBRAYAGE ACIER 1,5mm TM K10 C 3,33 € 4,00 €
10 25093 MOYEU D’EMBRAYAGE TM KZ10 C 70,83 € 85,00 €
11 35026 DISQUE DE RENFORT DE CLOCHE 7,50 € 9,00 €
12 49727 VIS 0,83 € 1,00 €
13 4008 JOINT SPI 20X26X4 3,42 € 4,10 €
14 25006 CLOCHE EMBRAYAGE TM KZ10 C 37,50 € 45,00 €
15 19040 CAGE A AIGUILLES HK2012 5,67 € 6,80 €
16 21005.1 SILENT BLOC D’EMBRAYAGE 1,25 € 1,50 €
17 40387 MOYEU D’EMBRAYAGE NU TM KZ10 C 116,67 € 140,00 €
18 12036 JOINT TORIQUE 0,63 € 0,76 €
19 26000 ENTRETOISE SORTIE BOITE 8,75 € 10,50 €
20 40376 KIT MOYEU EMBRAYAGE TM KZ10 C COMPLET 215,83 € 259,00 €
21 49637 ECROU M6 0,21 € 0,25 €
22 49104 RONDELLE D6 0,08 € 0,10 €
23 49710 PION 6X30 0,46 € 0,55 €
24 49480 VIS TCEI 6 x 10 0,08 € 0,10 €
25 49603 RONDELLE D6X12 0,04 € 0,05 €
26 21003 SILENT BLOC M/M 3,75 € 4,50 €
27 30163 CARTER D’EMBRAYAGE NOIR TM KZ10 C 187,50 € 225,00 €
28 K004B ROULEMENT 6202 C4 5,75 € 6,90 €
29 40385 COURONNE PRIMAIRE Z25 115,83 € 139,00 €
30 49251 CIRCLIPS 0,83 € 1,00 €
31 35052 AXE D’EMBRAYAGE 146,2 mm 3,42 € 4,10 €
32 19006 ROULEAU 0,17 € 0,20 €
33 35030 AXE D’EMBRAYAGE AVEC TETE 4,17 € 5,00 €
34 5115 JOINT COUVERCLE 2,33 € 2,80 €
35 04007.2 JOINT 40x52x5 avec anneau en métal 10,00 € 12,00 €
35 4007 JOINT 40x52x5 6,58 € 7,90 €
35 04007.1 JOINT 40x52x5 TEFLON 10,42 € 12,50 €
36 30162 PROTECTION COUVERCLE EMBRAYAGE 8,25 € 9,90 €
37 49890 VIS TBCE 5 x 15 0,29 € 0,35 €

REF. DESIGNATION Prix HT Prix TTC
1 49052 ECROU 1,90 € 2,28 €
2 48002 Cale 30 x 18 x 3 2,71 € 3,25 €
3 4009 JOINT 5X9X2 5,83 € 7,00 €
4 40439 ARBRE PRIMAIRE 13 DTS 74,17 € 89,00 €
5 19071 CAGE A AIGUILLE 15,83 € 19,00 €
6 40440 PIGNON PRIMAIRE 5EME 22 DTS 29,58 € 35,50 €
7 48041 RONDELLE 27,5X21X1 2,08 € 2,50 €
8 49222 CIRCLIP diam 21 0,67 € 0,80 €
9 40437 PIGNON PRIMAIRE 3/4EME 18/22 D 58,33 € 70,00 €
10 40454 PIGNON PRIMAIRE 6EME 27 DTS 30,42 € 36,50 €
11 40422 PIGNON PRIMAIRE 2EME 16 DTS 23,33 € 28,00 €
12 48003 RONDELLE 30X20X2 2,71 € 3,25 €
13 48013 RONDELLE 27X20X0.7 0,75 € 0,90 €
14 49216 CIRCLIP diam 20 0,50 € 0,60 €

REF. DESIGNATION Prix HT Prix TTC
1 49216 CIRCLIP 0,50 € 0,60 €
2 I023 PIGNON SORTIE DE BOITE DE VITESSE 14 16,67 € 20,00 €
2 I023 PIGNON SORTIE DE BOITE DE VITESSE 15 16,67 € 20,00 €
2 I023 PIGNON SORTIE DE BOITE DE VITESSE 16 16,67 € 20,00 €
2 I023 PIGNON SORTIE DE BOITE DE VITESSE 17 16,67 € 20,00 €
2 I023 Pignon de chaîne 17 dts pour TM    
2 I023 PIGNON SORTIE DE BOITE DE VITESSE 18 16,67 € 20,00 €
2 I023 Pignon de chaîne 18 dts pour TM    
3 4003 JOINT SPI 26X37X7 3,75 € 4,50 €
4 26150 COLLIER 2,33 € 2,80 €
5 12019 JOINT TORIQUE 0,50 € 0,60 €
6 48039 RONDELLE 32X21X2 2,42 € 2,90 €
7 19066 CAGE A AIGUILLE 7,42 € 8,90 €
7A 26149 BAGUE 3,75 € 4,50 €
8 40486 Pignon 2ème AS Z 29 39,17 € 47,00 €
9 26152 Cale 1,25 € 1,50 €
10 40464 ARBRE SECONDAIRE NU 46,25 € 55,50 €
11 40536 PIGNON SECONDAIRE 6EME 25 DTS 42,50 € 51,00 €
12 49221 Bague d’arrêt 0,75 € 0,90 €
13 48251 RONDELLE 0,83 € 1,00 €
14 19070 CAGE A AIGUILLE 5,33 € 6,40 €
15 40503 PIGNON SECONDAIRE 4EME 27 DTS TM KZ 46,25 € 55,50 €
16 40495 PIGNON SECONDAIRE 3EME 27 DTS TM KZ 47,42 € 56,90 €
17 40515 PIGNON SECONDAIRE 5EME 23 DTS TM KZ 44,58 € 53,50 €
18 48012 RONDELLE 0,67 € 0,80 €
19 40472 PIGNON SECONDAIRE 1ère 33 DTS 40,42 € 48,50 €
20 19011 CAGE A AIGUILLE 5,92 € 7,10 €
21 48010 RONDELLE 0,29 € 0,35 €

REF. DESIGNATION Prix HT Prix TTC
1 33100 BARILLET DE VITESSE TM KZ10 C 120,83 € 145,00 €
2 33013 FOURCHETTE ARBRE SECONDAIRE 37,50 € 45,00 €
3 33011 FOURCHETTE ARBRE SECONDAIRE 37,50 € 45,00 €
4 33096 AXE FOURCHETTE ARBRE SECONDAIRE 9,58 € 11,50 €
5 33010 FOURCHETTE ARBRE PRIMAIRE 32,08 € 38,50 €
6 33020 AXE FOURCHETTE ARBRE PRIMAIRE 5,42 € 6,50 €
7 49485 VIS A TETE 6X25 0,25 € 0,30 €
8 16095 RESSORT DE RAPPEL 2,00 € 2,40 €
9 26007 ENTRETOISE DE RESSORT 1,42 € 1,70 €
10 26140 PLATINE DE SELECTION 13,33 € 16,00 €
11 49302 BOUCHON REMPLISSAGE 4,25 € 5,10 €
12 49103 JOINT BOUCHON VIDANGE 0,38 € 0,46 €
13 49851.1 BOUCHON VIDANGE MAGNETIQUE 8,75 € 10,50 €
13A 49118 RONDELLE 0,13 € 0,16 €
14 49003.1 RACCORD DE DEPRESSION 2,08 € 2,50 €
15 26096 PLAQUE ARRIERE CLIQUET 2,00 € 2,40 €
16 26094 PLAQUE FIN DE COURSE 2,67 € 3,20 €
17 49405 VIS A TETE 6X20 UNB. 0,38 € 0,46 €
18 40310 PORTE CLIQUET 29,17 € 35,00 €
19 16012 RESSORT 0,58 € 0,70 €
20 26062 PORTE RESSORT 1,58 € 1,90 €
21 26060 CLIQUET SUPERIEUR 6,25 € 7,50 €
22 26061 CLIQUET INFERIEUR 6,25 € 7,50 €
24 26045 PION DE CENTRAGE 1,75 € 2,10 €

REFERENCES DESIGNATION Prix HT Prix TTC
1a H79F Silencieux ELTO TD/2 inox long. 500 mm KZ 208,33 € 250,00 €
2 27000.31 Pot d’échappement KZ10-C 282,50 € 339,00 €
3 27027.2 Coude d’échappement 15,83 € 19,00 €
4 27023 Coude d’échappement 26/28 19,17 € 23,00 €
5 27022.2 Entretoise 26/28 5,42 € 6,50 €
6 50156 PLATINE MOTEUR TM KZ10 C 150,00 € 180,00 €
7 50014 Bride de platine 16,67 € 20,00 €
  C039B Bride de platine ADAPTABLE 10,75 € 12,90 €
8 M014 BTR 10 x 40 0,96 € 1,15 €
10 21020 Durite d’eau 8,17 € 9,80 €
11 H59 Ressort biconique 3,33 € 4,00 €

TM KZ10 – TM KZ10 B

Les articles « en rouge » dans les différentes rubriques peuvent être sélectionnés et commandés en ligne. Le transport est gratuit ou quasi gratuit pour ces articles

REFERENCES DESIGNATION Prix HT Prix TTC
1b J061 CAPUCHON DE BOUGIE NGK TB05 EMA 10,00 € 12,00 €
2a J022x4 Kit Bougies NGK R6254 E 105    
3 PMTM329.001 VIS 6X30 0,50 € 0,60 €
5 PMTM328.001 JOINT TORIQUE INTERNE 1,00 € 1,20 €
6 PMTM328.006 JOINT TORIQUE EXTERNE KZ10 2,70 € 3,24 €
7a PMTM321.004 CYLINDRE TM KZ10 507,00 € 608,40 €
7c PMTM321.008 CYLINDRE TM KZ10 B 550,00 € 660,00 €
9b PMTM328.030 JOINT D’EMBASE 0.05 KZ10-B 1,60 € 1,92 €
9b PMTM328.031 JOINT D’EMBASE 0.10 KZ10-B 1,60 € 1,92 €
9b PMTM328.032 JOINT D’EMBASE 0.15 KZ10-B 1,60 € 1,92 €
9b PMTM328.033 JOINT D’EMBASE 0.20 KZ10-B 1,60 € 1,92 €
9b PMTM328.034 JOINT D’EMBASE 0.30 KZ10-B 1,60 € 1,92 €
9b PMTM328.035 JOINT D’EMBASE 0.40 KZ10-B 1,60 € 1,92 €
9b PMTM328.036 JOINT D’EMBASE 0.50 KZ10-B 1,60 € 1,92 €
10 PMTM373.003 JOINT D’ECHAPPEMENT TM KZ10- TM KZ10B 2,60 € 3,12 €
10b PMTM373.005 ENTRETOISE D’ECHAPPEMENT TM KZ10B 5MM 4,58 € 5,50 €
10b PMTM373.006 ENTRETOISE D’ECHAPPEMENT TM KZ10B 3MM 9,75 € 11,70 €
11 PMTM372.007 PIPE D’ECHAPPEMENT TM KZ10 – TM KZ10B 49,90 € 59,88 €
12a PMTM411.017 VIS M6X16 0,54 € 0,65 €
12b PMTM411.021 VIS M6X20 0,50 € 0,60 €
13 PMTM402.001 RACCORD DURIT EAU 4,25 € 5,10 €
14 PMTM402.002 COLLIER Ø16/28 1,60 € 1,92 €
15 PMTM402.003 DURIT EAU 6,37 € 7,64 €
42a PMTM322.005 CHAMBRE DE COMBUSTION TM KZ10 88,02 € 105,62 €
42b PMTM322.007 CHAMBRE DE COMBUSTION 4° TM KZ10 88,02 € 105,62 €
42c PMTM322.008 CHAMBRE COMBUSTION 4° TM KZ10B 92,50 € 111,00 €

REFERENCES DESIGNATION Prix HT Prix TTC
1 PMTM325.001 SEGMENT D 54 17,50 € 21,00 €
2a K161D. Kit piston VERTEX TM racing 7° complet de 53.93 à 53.97    
2b K161F. Kit piston Vertex TM racing 4° complet de 53.93 à 53.97    
3 PMTM326.002 AXE DE PISTON 6,67 € 8,00 €
4 PMTM327.001 CLIPS DE PISTON 0,50 € 0,60 €
5 K128B CAGE A AIGUILLES 11,58 € 13,90 €
6a 18052 BIELLE COMPLETE D20 TM KZ10 200,00 € 240,00 €
6a 18052 Kit bielle complète TM racing 20 mm    
6a 18119.2 BIELLE COMPLETE D20 SPECIAL TM KZ10 221,66 € 265,99 €
6b 18125 BIELLE COMPLETE D22 TM KZ10B 242,00 € 290,40 €
6b 18125 Kit bielle complète TM racing 22 mm maneton percé    
7a 18053 BIELLE NUE D20 TM K9c – KZ10 198,00 € 237,60 €
7b 18053.2 BIELLE NUE D22 TM KZ10 B 160,00 € 192,00 €
8a PMTM333.002 MANETON D20X50.4 (Ø8) STD 16,70 € 20,04 €
8a PMTM333.003 MANETON D20X50.4 (PLEIN) USINE 18,60 € 22,32 €
8b 18091 MANETON D22X50.4 percé 29,17 € 35,00 €
9a PMTM334.001 CAGE DE BIELLE D20 TM 27,92 € 33,50 €
9b PMTM334.003 CAGE DE BIELLE D22 TM 34,08 € 40,90 €
10a PMTM336.001 RONDELLE ARGENT D20 4,58 € 5,50 €
10b PMTM336.002 RONDELLE ARGENT D22 4,58 € 5,50 €
11a PMTM331.002 VILEBREQUIN COMPLET D20 3TROUS TM KZ10 460,00 € 552,00 €
11b PMTM331.006 VILEBREQUIN COMPLET Ø20 TM KZ10B 818,85 € 982,62 €
11c PMTM331.007 VILEBREQUIN COMPLET Ø22 TM KZ10B 720,83 € 865,00 €
12a PMTM331.001 DEMI VILEBREQUIN (2) 500,00 € 600,00 €
13 K104 JOINT SPI 20X35X7 5,21 € 6,25 €
14a PMTM381.001 PIGNON ARBRE PRIMAIRE 19DTS 38,00 € 45,60 €
15 PMTM412.001 CIRCLIP 1,00 € 1,20 €
16 49056 ECROU D ALLUMAGE TM KZ10B 4,80 € 5,76 €
18a K022B ROULEMENT 6205 C4 SKF 8,50 € 10,20 €
19 K024 ROULEMENT 6205 SKF à rouleaux BC1 52,08 € 62,50 €

 

 

REFERENCES DESIGNATION Prix HT Prix TTC
1b PMTM311.005 CARTER MOTEUR TM KZ10 B nu 515,00 € 618,00 €
1c PMTM311.006 CARTER MOTEUR TM KZ10-ES nu 515,00 € 618,00 €
2 19036 PION DE CENTRAGE 6X12 0,67 € 0,80 €
3 26091 PION DE CENTRAGE 8X12 0,92 € 1,10 €
4a K013 ROULEMENT 6205 C4 SKF 7,50 € 9,00 €
4b K024 ROULEMENT BC1 A ROULEAUX SKF 52,08 € 62,50 €
5 K104 JOINT SPI 20X35X7 5,21 € 6,25 €
6 3009 ROULEMENT 6202 Z C3 6,67 € 8,00 €
7 3012 ROULEMENT 6001-2 RS 7,08 € 8,50 €
8 K003B ROULEMENT 6204 C3 ACIER SKF 6,58 € 7,90 €
9 K009 ROULEMENT 6205 C3 ACIER SKF 8,50 € 10,20 €
10 19041 ROULEMENT A AIGUILLE DHK 35/12 9,58 € 11,50 €
11 4003 JOINT SPI 26X37X7 3,75 € 4,50 €
12 4004 JOINT SPI 12X22X5 3,46 € 4,15 €

 

REFERENCES DESIGNATION Prix HT Prix TTC
A1 PMTM352.003 CLAPET CARBONE 0,34 T 30,00 € 36,00 €
    Kit clapets adaptable + joints boîte à clapet TM K9    
A3 PMTM352.006 ARRETS METALIQUES TM KZ9 C / TM KZ10 12,50 € 15,00 €
A4 PMTM352.007 JEU CONTRE PLAQUE CLAPET 42,44 € 50,93 €
1 PMTM321.012 PIPE D’ADMISSION TM KZ10 29,00 € 34,80 €
2 PMTM321.013 FIXATION PIPE D’ADMISSION TM KZ10 4,00 € 4,80 €
4 PMTM329.001 VIS 6X30 0,50 € 0,60 €
5 PMTM351.006 COUVERCLE BOITE A CLAPETS TM KZ10 92,00 € 110,40 €
6 PMTM354.002 JOINT COUVERCLE BOITE A CLAPET TM KZ10 2,00 € 2,40 €
7 PMTM351.004 BOITE A CLAPETS COMPLETE TM K9 C / TM KZ10 179,00 € 214,80 €
8 PMTM354.001 JOINT DE BOITE A CLAPET 2,12 € 2,54 €
9 PMTM411.001 VIS DE LAMELLE 0,50 € 0,60 €


REFERENCES DESIGNATION Prix HT Prix TTC
1 PMTM383.001 CIRCLIP 2,12 € 2,54 €
2 PMTM382.030 PLATEAU D’EMBRAYAGE TM KZ10 B 55,00 € 66,00 €
4 PMTM383.003 RESSORT 1,60 € 1,92 €
5 PMTM413.001 RONDELLE 2,12 € 2,54 €
6 PMTM383.010 CAGE A AIGUILLES 5,84 € 7,01 €
7 PMTM383.004 AXE 3,70 € 4,44 €
8 PMTM382.002 GARNITURE D’EMBRAYAGE 7,00 € 8,40 €
9 PMTM382.001 DISQUE D’EMBRAYAGE 3,70 € 4,44 €
10b PMTM382.031 TAMBOUR D’EMBRAYAGE KZ10B-C 70,83 € 85,00 €
11a PMTM382.003 DISQUE KZ10 7,50 € 9,00 €
11b PMTM382.032 DISQUE KZ10B-C 7,50 € 9,00 €
12 PMTM411.019 VIS 1,00 € 1,20 €
13 PMTM383.006 JOINT SPI 20X26X4 3,42 € 4,10 €
14 PMTM382.033 CLOCHE EMBRAYAGE KZ10B 41,00 € 49,20 €
15 PMTM383.011 CAGE A AIGUILLES HK2012 5,67 € 6,80 €
16 PMTM383.007 BUTEE 1,60 € 1,92 €
17 PMTM382.025 MOYEU EMBRAYAGE NU KZ10B 92,00 € 110,40 €
18 PMTM383.008 JOINT 1,50 € 1,80 €
19 PMTM383.013 ENTRETOISE SORTIE BOITE 10,08 € 12,10 €
20 PMTM383.030 KIT MOYEU EMBRAYAGE TM KZ10B COMPLET 199,00 € 238,80 €
21 PMTM412.003 ECROU M6 0,21 € 0,25 €
22 PMTM413.002 RONDELLE D6 0,08 € 0,10 €
23 PMTM411.020 GOUJON 6X30 0,46 € 0,55 €
24 PMTM411.007 VIS M6X10 0,08 € 0,10 €
25 PMTM413.003 RONDELLE D6X12 0,04 € 0,05 €
26 PMTM383.014 SILENT BLOC M/M 3,75 € 4,50 €
27 PMTM382.027 COUVERCLE EMBRAYAGE KZ10 B 69,00 € 82,80 €
28 K003 ROULEMENT 6202 C4 ACIER SKF 5,75 € 6,90 €
29 PMTM382.010 COURONNE PRIMAIRE 75 DTS 120,00 € 144,00 €
30 PMTM383.016 CIRCLIPS 1,00 € 1,20 €
31a PMTM383.017 TIGE POUSSOIR EMBRAYAGE KZ10 3,70 € 4,44 €
31b PMTM382.037 TIGE POUSSOIR EMBRAYAGE KZ10 B 3,70 € 4,44 €
32 PMTM383.018 PION 0,50 € 0,60 €
33 PMTM383.019 POUSSOIR D’EMBRAYAGE 4,70 € 5,64 €
34 PMTM383.031 JOINT COUVERCLE KZ10 2,59 € 3,11 €
35 PMTM383.009 JOINT SPI 40X52X7 6,58 € 7,90 €

REFERENCES DESIGNATION Prix HT Prix TTC
1a H79F Silencieux ELTO TD/2 inox long. 500 mm KZ 208,33 € 250,00 €
2a PMTM371.010 POT D’ECHAPPEMENTPEMENT KZ10-KZ10ES 295,00 € 354,00 €
2b PMTM371.011 POT D’ECHAPPEMENTPEMENT KZ10-B 295,00 € 354,00 €
3 PMTM372.001 COUDE ECHAPPEMENT D28/28 20,00 € 24,00 €
4 27023 COUDE ECHAPPEMENT D26/28 19,17 € 23,00 €
5 27022.2 REDUCTION TUBE Ø 26/28 5,42 € 6,50 €
6a PMTM316.013 PLATINE MOTEUR TM KZ10 B 158,33 € 190,00 €
6b PMTM316.015 PLATINE MOTEUR TM KZ10 ES 165,36 € 198,43 €
7 50014 BRIDE DE DE PLATINE TM KZ10 B 16,67 € 20,00 €
8 M014 VIS M10X40 0,96 € 1,15 €
9 PMTM411.014 VIS M8X25 0,50 € 0,60 €
10 21020 DURITE EAU 8,17 € 9,80 €
12 H59 RESSORT ECHAPPEMENT 3,33 € 4,00 €

 

Championnat de France KZ2 Val d’Argenton 2017

Championnat de France KZ2 Val d’Argenton 2017

KZ2 Master

1er LE BRIGAND JULIEN (CRG / TM)

3ème RENAUX JOHAN (CRG / PARILLA)

12ème FONTENILLE VINCENT (CRG)

14ème DORMOY THOMAS (CRG / PARILLA)

KZ2

7ème CYPERS THOMAS (ZANARDI / PARILLA)

9ème MARCHANDISE LAURENT (CRG / PAILLA)

TM Racing moteur

TM KZ-R1 2019 moteur engine KZ2 karting  moteur-tm-kz-r1-black-power-crg renneskart

REF. MOTEUR TM PRIX HT PRIX TTC
TMKZ-R1 TM KZ-R1 standard 3 600,00 € 4 320,00 €
TMKZ-R1-U TM KZ-R1 « usine » sans pompe à essence 3 900,00 € 4 680,00 €
63029.1 CRG TM KZ-R1 TITAN BLACK usine « full options » pompe à essence Mikuni DF52 4 108,00 € 4 929,60 €
TM0729 TM S2-SENIOR 2 320,00 € 2 784,00 €
. TM S2-JUNIOR 2 200,00 € 2 640,00 €

	

CIK-FIA WORLD KZ CHAMPS & INTERNATIONAL KZ2 SUPER CUP WACKERSDORF

CIK-FIA WORLD KZ CHAMPS & INTERNATIONAL KZ2 SUPER CUP WACKERSDORF

KZ – Finale

1er De Conto, Paolo (CRG / TM)

4ème Pex, Jorrit (CRG / TM)

8ème Pex, Stan (CRG / TM)

13ème Dale, Andrea (CRG / TM)

KZ2 – Finale

2ème Persson, Benjamin (CRG / TM)

5ème Zanchetta, Marco (MARANELLO / TM)

8ème Gonzales, Nicolas (MARANELLO / TM)

9ème Paul, Maximilian (DR kart)

10ème Rosati, Fabrizio (CRG / TM)

ZANARDI kart / CRG kart / MARANELLO kart / DR kart – RENNESKART

PARILLA engines / TM engines – RENNESKART

GREAT CRG WITH DE CONTO. THE 40th WORLD CHAMPIONSHIP WON IN WACKERSDORF
Paolo De Conto secured the second KZ world title in a row on CRG-Tm in the World Championship held in Germany, 40th for CRG. CRG close to the big target also in KZ2 with Benjamin Tornqvist Persson in the International Super Cup.

The CIK-FIA KZ World Championship in Wackersdorf ended with another great win for CRG, that secured its 40th title with Paolo De Conto, who won his second world title in a row after, the one taken last year in Sweden, also on CRG-Tm.
In reality, CRG was very close to scoring another double win in Germany, as happened last year in Sweden, when Paolo De Conto was crowned 2016 KZ World Champion and Pedro Hiltbrand won with CRG the International KZ2 Super Cup. This time around, in Wackersdorf (Germany) another double win was at reach in KZ2 with the Dutch driver Benjamin Tornqvist Persson, who has been leading the Final until the last corner, but in this occasion CRG Holland’s driver had to settle for P2, as he was pipped by Alex Irlando in the sprint to the line.

CRG once again has been competitive and charging for the victory in both categories. Things went down to the wire in KZ2, while Paolo De Conto had the upper hand on his rivals recovering from P14 in qualifying, result that he had converted into P4 after the heats. De Conto therefore deservedly claimed another KZ World Championship, after winning the KZ European Championship in Kristianstad last July 30th. Amazing Paolo De Conto! He has been already crowned World Champion two times and European Champion three times.

In KZ, Jorrit Pex has also been shining in Wackersdorf completing a recovery up to the final fourth place, after holding a podium position for several laps. Stan Pex also run a strong race, ending eighth after an incident in the closing heat on Sunday morning penalized his starting position in the final. Andrea Dalè (Nuova 3M) also put in a solid performance ending 13th, while Flavio Camponeschi lost a few positions crossing the finish line in 16th position. Alessandro Giardelli run a strong race showing all his grit the first year in the category, ending the World Championship in 21st place. Macau’s driver Wing Chung Chang run a positive race ending 24th. Fabian Federer (SRP) has always been among the protagonists, but ended his Final on the first lap due to an incident with Lammers.

In KZ2, alongside the second place obtained by Benjamin Tornqvist Persson, CRG’s Fabrizio Rosati (SRP) ended within the top ten in P10. The Dutch driver Dylan Davies of CRG Keijzer Racing was 14th, CRG Holland’s Joey Hanssen 14th, Kay Van Berlo (CRG Keijzer) 22nd and Max Tubben (CRG Holland) 23rd due to a penalty. Some bad luck hit the two German drivers of CRG TB Racing Team Dominik Schmidt and Moritz Horn, that respectively ended 30th and 31st. The two Spanish drivers Gerard Cebrian Ariza and Enrico Prosperi, and the French Emilien Denner on Kalì Kart could not qualify for the Final instead.

An ecstatic Paolo De Conto commented his victory in KZ in this way: “This second KZ World Championship has been quite different from last year. This time around I did not put in a good lap in qualifying and I started heats from the fourth row. I had to take a lot of risks to get some ground back, but I managed to clinch the second row of the grid for the Final, a position that allowed me to fight for the win. We did an amazing job. I would like to thank CRG, starting from Giancarlo Tinini, the whole family and all the guys back at the factory, my mechanic Omar who did an exceptional work and, finally, my family and friends. This has been a difficult team victory, I also want to thank TM for the great job done that allowed us to be in front and take the win. This year CRG and I secured also the victory of the KZ European Championship, it has been a great season. I could not wish for more. Now we start working for the next season, aiming to score some other great results with CRG.”

ZANARDI kart / CRG kart / MARANELLO kart / DR kart – RENNESKART

PARILLA engines / TM engines – RENNESKART